2024 Autel MaxiBAS BT508 Car Battery Tester 6V 12V Load Tester 100-2000 CCA Added AUTOVIN, Electrical Reset, Battery Health Report Update of BT506

Product Description

Autel MaxiBAS BT508 Car Battery Tester

The Autel MaxiBAS BT508 is powerful yet, lightweight battery and electrical system tester that uses Adaptive Conductance, an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a battery’s true health. Download the free and easy-to-use mobile app, available for iOS and Android devices, to use with the BT508 to perform testing and display test results. The BT508 package includes a wireless Bluetooth vehicle communication interface enabling battery and electrical component registration.

Features:

1. Support in-vehicle and out-of-vehicle testing of passenger vehicle batteries
2. Test 12-volt batteries: 100 - 2000 CCA
3. Test 12-volt cranking/charging systems
4. Test Flooded, AGM, AGM Spiral, EFB and GEL batteries
5. Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA
6. One-touch battery registration
7. Illustration instruction guides for battery positioning and testing
8. Read and erase codes of all available systems

Cranking & Charging System Test: Check the health of the starter
Adaptive Conductance: Detect low capacity batteries, Improve the detection rate of bad batteries
In-vehicle and Out-vehicle Test: Check battery real status with vehicle or not
Electrical System Diagnosis: Check battery system and locate error codes
One-touch Battery Registration: Change battery and register a new one
Battery Location Diagrams: Accurately locate the battery
Battery Health Check: Check the battery capacity and startup capability
All System Diagnostics (only available for one vehicle brand): Scan all system diagnostics just for one vehicle brand



Why Need the Autel BT508 Battery Tester ?

As you know, car batteries lose their power and performance with time hence the need to have them checked from time to time. Autel BT508 battery load tester will help you test the health of your car's battery and remind you to keep the battery in time to avoid unnecessary damage.

Why Choose Autel MaxiBAS BT508?

1.Fast Test: Deliver test results in seconds, ideal for busy shops;
2.Safe Connection: Safety clamps with reverse polarity protection;
3.Future Technologies: Support future battery and vehicle types via software updates;
4. Innovative Adaptive Conductance: Get more accurate examinations;
5. Battery & Electrical System Diagnostics: Battery Test/Starter Test/Generator Test;
6. Easy Share: Print out or email reports, easy to share with customers;
7. Auto Battery Registration: Battery Registration (53 Vehicle Makes );
8. Auto-Save: Saves test reports automatically for later view;
9. Wi-Fi Enabled: Wi-Fi connectivity to email test reports and update software.

Note: The BT508 does not have a screen! To perform testing and display test results, the BT508 must be used with a smart device that runs iOS or Android (coming soon) apps available.

Autel MaxiBas BT508 upgrade version of BT506



Intelligent Adaptive Conductance Technology

Autel MaxiBas BT508 has advanced adaptive conductance function, which can dynamically adjust the algorithm according to battery noise, voltage, and surface charge, accurately detect battery capacity and power to reduce the probability of misjudgment.

Reduce battery misdiagnosis: State statistics show that 50% of recycled batteries are good and only need to be recharged. Battery tester BT508 adopts adaptive conductance technology will improve diagnostics accuracy to 95.59%, higher than 92.06% of conductance profile.
Reduce charge and reset of discharge battery: Other competitive battery testers cannot conduct SOH test to identify discharge battery, which will lead to invalid reset and charge. Using adaptive conductance technology, the battery tester BT508 can quickly detect battery SOH, saving diagnostic wait time by 50%.
Diagnose low capacity batteries: If the battery tester does not quickly identify the capacity status of the battery, there will be some misdiagnosis, which can lead to increased costs and wasted batteries. Battery tester Autel BT508 will improve bad detection rate to 63.55%, which is 15%(56.36%) faster than the battery tester using conductance profiling.

Compared to conductivity profiling, adaptive conductivity uses dynamic loads instead of fixed loads, which can be adjusted via in-vehicle environment, making battery diagnosis faster and more stable. Adaptive conductance has a 30A discharge (conductance profile is 10A) for faster battery testing and diagnosing.
Choose BT508 battery scanner with adaptive conductance capability to speed up diagnostic maintenance!!!



Cranking/ Starter Test & Generator Test & Battery Test
BT508 has same functions as BT608 on Cranking/ Starter Test & Generator Test and Battery Test.

Cranking/ Starter Test: Test 12V and 24V cranking/ charging systems for cranking Amps, engine cranking speed
Generator Test: Test generator systems for pipple, off-load voltage, load voltage current, load current, load capacity of the battery, etc
Battery Test: Check Battery condition in-vehicle or out-vehicle



Battery Replacement Diagram Guide Step-by-step:
With BT508 battery tester, you are allowed to perform whole battery change steps one by one:

Battery Type Suggestion: Checking battery real condition first and deter whether change battery
Save Battery Information: Save vehicle’s onboard data when vehicle’s battery is removed or disconnected
Replace the Battery: Replace the battery step by step as prompted
Register a new battery: After replacing new battery, we need use BT508 connect battery and vehicle control module, registering this new battery into vehicle electrical system modules.
Choose right battery information: Select the previously stored battery information

Note:
According to the instructions on the screen, different battery registration process is varied by vehicels, please operating by actual condition.



Auto Registration (after battery replacement): Auto registration is often used after the successful installation of a new battery, including BMS reset and Electric appliance reset.
After registration of new battery, it can perform vehicle systems initialization to reset the components.



Battery Types & Standards

Compatible battery types and standards are as follows:
Types: FLOODED, AGM, AGM SPIRAL, EFB, and GEL
Standards: CCA, SAE, CA, EN, EN2, IEC, DIN, JIS, MCA, BCI, and GB



BAS Manager

BAS Manager allows you to establish a Bluetooth connection to check and update the firmware version.



Repair Reports

Battery Test App can save history scan reports from your diagnostic sessions. A PDF can also be generated for the easy viewing, sharing, and printing of these reports.



Autel MaxiBAS BT508 is capable to read/clear codes, view live data, ECU info, Freeze Data Frame, Auto VIN for all vehicle systems including Engine, Body, Chassis, ECM, TCM, ABS, SRS, BCM, IMM, BMS, SAS, Fuel System, Light System, Wiper System, etc.

Note:
Only one brand vehicle can be choosed. If you need other vehicles system diagnosis function, please pay subscription fee to open up.



Locate Battery Position

You can freely view the battery position on the screen and pinpoint the battery position.



Multi-Language

If you want to chang language, you can send above S/N (12 digits) to us to free change languages.



Accessibility Help You Use Your Device More easily

Battery Location Diagram: You can view the battery position diagram.
Repair Reports: The Battery Test app can save a history of scan reports from your diagnostic sessions. A PDF can also be generated for the easy viewing, sharing, and printing of these reports.
Data Logging: The Data Logging option allows you to launch the Autel Support platform to view all recordings on the diagnostic system. The Data Logging option keeps all test records, whether submitted (Feedback) or not submitted (Not Feedback), in addition to a history of your most recent 20 test records (History). Autel support personnel will receive and process any submitted reports through the Support platform.
BAS Manager: The BAS Manager allows you to establish a Bluetooth connection, and to check and update the firmware version.
VCI Manager: VCI Manager is for connecting the MaxiBAS BT508 with a VCI device via Bluetooth. This option allows you to pair the tester with the VCI device, check the communication status, and upgrade the VCI firmware.
Diagnostic Software Update: Charge for additional vehicle brands and annual update

NOTE: Package includes A wireless Bluetooth vehicle communication interface enabling battery and electrical component registration. Connectivity:USB 2.0, Type C, Bluetooth V3.0 BR/EDR+ V4.2 LE Dual-Mode

Autel BT608 vs Autel BT508 vs Autel BT506



Autel MaxiBAS BT508 Product Specifications:
 
Item                                             Description
Connectivity:                               USB 2.0, Type C
                                                    Bluetooth, V3.0 BR/EDR+ V4.2 LE Dual-Mode
Input Voltage:                              5V DC
Working Current:                         < 150 mA at  12 V DC
CCA Range:                               100 to 2000 A
Voltage Range:                          1.5 to 16V
Working Temperature:               -10° to 50° C   (14° to 122° F)
Storage Temperature: -20° to 60° C   (-4° to 140° F)
Dimension (L x W x H): 107 mm (4.21“)   x 75 mm (2.95”) x 26 mm (1.02”) (clamp cable not included)
Weight:                                    320 g (0.7 lb.)

Package List

MaxiBAS BT508
Battery Clamp Cable (Black)
Battery Clamp Cable (Red)
VP200
User Quick Guide
Packing Box



 




Shipping Method and Delivery Time:

US, Czech and UK Warehouse Shipping: 3-5 working days. Fast Delivery & Tax Free.
DHL Shipping: 3-5 working days. Usually we declare a lower value on DHL invoice to help with customs clearance. If address belongs to remote area, customer will need to pay remote handling cost or we can change to ship by EMS. Please remember to leave message if you have any special requirement.
Yanwen Express: 7-10 working days. No Tax or remote cost for European Countries.
Standard Post: 7-15 working days. To South America and Africa countries it may take 20-25 working days. Customers can tick Express Shipping Service to ship by DHL.